Screw you know the safe operation

 Screw the whole production chain has become one of important equipments. Advanced structure, adaptable, small resistance, long life, easy maintenance, protection devices is a

significant feature of the screw conveyor. Screw conveyor can not run in the subsequent stage of the inverter circuit, such as the identification of maintenance needs, you must

stop the inverter in case of operation, otherwise it may damage the drive.
Before running the screw conveyor, first make sure that the screw conveyor equipment, personnel, is transported goods are in safe intact state; Second, check all moving parts of

the normal no foreign body, check all electrical wiring is normal, normal to the belt conveyor put into operation. Finally, check the supply voltage and the device does not

exceed the difference between the rated voltage ± 5%.heat exchange manufacturers
Run into the screw conveyor, you must do the following:
1 Close the main power switch, check the device power is being fed properly and the power indicator is lit. To normal after the next step.
2 Close the power switch on each loop, check whether it is normal. Under normal conditions of: device does not operate, belt conveyors running light is not on, inverter and

other equipment, power indicator light, the inverter display panel shows the normal (no fault code is displayed).
3 in accordance with the process starts all electrical equipment in turn, starting on a normal electrical equipment (motors or other equipment has reached the normal speed, the

normal state) and then the next one electrical device startup.
In the screw conveyor operation, is transported goods must comply with the requirements of the design objects, to comply with screw conveyor design capabilities. Secondly, we

must pay attention to all categories of personnel not touch the moving parts of the conveyor belt, non-professionals are not free to contact with electrical components, control
Incline Belt conveyor
buttons, etc