FU chain conveyor selection

FU chain conveyor correct and reasonable selection and proper use of reasonable care to fully reflect the performance of advanced equipment, here we give users the following

references:

1, the conveying speed of choice:

     Users should be based on the state of the material, first select the appropriate link speed (see table), such as a strong abrasive materials, high temperature materials,

materials in relatively large number of coarse grains and pellets large materials should be selected speed slow, other performance Refer to Table a choice.

2, the choice of models:

      Link speed is determined, the throughput can be selected according to the most appropriate models, each model has its most appropriate throughput (see table), various

models of selection table (see table) also Interpretation clear maximum throughput, maximum transmission length and power options for deals. Must be in place,

In the same throughput, choose the larger models can link speed reduced, thus extending the service life, but not too small throughput, if the actual amount is less than the

amount of 30% or more transport aircraft, the use will occur when the material layer over Thin cause idling, but increased wear.plastic chain conveyor

3, the power of choice:

     Once the model is selected, according to throughput, transmission length, and selection process layout condition loaded with power and drive type (left loaded, the right

equipment).

4, expected out of choice:

     The size of the material inlet and outlet have been released out in Figure 1, the user can choose according to need, the choice must note the following: (a) on the poor

mobility or humidity of the material, generally motivated material should not be used to avoid feed poor material. (2) Due to process limitations know, when the intake

Spout from the tail shaft closer, generally should not be used motivated discharge. (3) The machine can be used multiple feed ports and a plurality of feed, according to require

the user to make their own determination.heavy duty conveyor