Once the food conveyor line fault how we Maintenance
Conveyor is convenient, but in order to protect our lives and property, or to be cautious strict accordance with the production requirements to operate.
Transmission line equipment in the food or in the production line staff install conveyor equipment, often for some jobs often malfunction can not find the crux of it is not
understood how to troubleshoot and even delay the production losses to the enterprise. Below we talk about the food conveying line at runtime, transmission lines belt deviation
causes and treatment methods, and food conveyor maintenance.pallet conveyor
Has long been widely used in coal, grain, flour mills and other industries in the conveyor, not only easy to manage but also can be transported in bulk (lightweight) of the
material, but also to transport bags (weight-based) materials.
Conveyor belt in a production run which, slipping for many reasons, the following we talk often seen in the job as well as ways to deal with:
The first belt conveying line the food load is too large, the load exceeds the capacity of the motor can, therefore slip. At this point should be to reduce the amount of
transported material transport conveyor itself or increase the loading capacity.
The second is the food conveyor line to start too fast and cause slipping. At this point should slow start or jog again and restart twice, it can overcome the slip phenomenon.
The third is the initial tension is too small. The reason is belt tension when leaving the drum is not enough, caused by belt slippage. At this point processing method is to
adjust the tensioning device, increase the initial tension.
The fourth is a roller bearing damage without rotation. May be due to the accumulation of too much dust or did not timely maintenance and replacement has been severely worn and automatic checkweigher
rotation is not flexible components, resulting in increased resistance and slip.
Fifth is the conveyor belt drive roller and the friction between the slippage caused by insufficient. Most likely cause of the conveyor belt with water or humid operating
environment. At this point in the drum should add a little rosin powder.
Food conveyor using a simple convenience, but in order to protect our lives and property, or to be cautious strict accordance with the production requirements to operate.