Conveyors safety rules

A fixed conveyor installation method should be required to install a fixed basis. Mobile conveyor official before running wheels should live or with a triangular wedge brakes

stopped. Avoid walking around the work place, a number of conveyor parallel operation, the machine and the machine between the machine and the wall of the

Should be one meter between the channels.check weighers

Two, the conveyor must be inspected prior to use part of the operation, the tape fastener and bearing device is normal, protective equipment is complete. Tape tensioner degrees

required before starting to adjust to the appropriate level.

Third, the belt conveyor should load start. Other operating normally before feeding. Prohibits driving after the first feeding.

Fourth, several conveyor running series, we should begin the discharge end, the sequence starts. All normal operation only after the feeding.

Fifth, run the tape deviation phenomenon occurs, you should stop adjustment shall not be reluctant to use, so as not to wear edges and increase the load.

Six, working environment and sent the material temperature not higher than 50 ℃ and below -10 ℃. Shall not be transported with a pH of oils and organic solvents constituent

materials.

VII prohibits pedestrians or on the conveyor belt by people.Weight Sorter

Eight, must be stopped before stopping feeding, unloading and other material on the belt to make deposits before parking.

Nine, the conveyor motor must be well insulated. Mobile conveyor cables do not Luanla and dragging. Motor must be grounded reliably.

Ten, belt slipping a hand to pull the belt is strictly prohibited, so as to avoid accidents.