Pipe Conveyor Belt design elements

    For pipe conveyor belt conveyor and general similar, but also used in the design of some of the important technologies. Rigid and flexible as required, to use a special

skeleton structure. Conveyor must have rigidity through the roller group so as to establish and maintain the circular tube.

At the same time, it must have a certain flexibility, to ensure conveyor belt through the transition section, through the feed zone in the line and rolled into a planar circular

tube running through the drum unloading. This fabric layer may be added between the belt rubber layer to meet.flexible conveyor
    In order to ensure a good seal overlapping portion, thereby preventing leakage of the material, to reduce the rigidity of the belt edge. Further, the upper and lower layer

to control the thickness and curing times, increase the natural tendency of a tube-shaped belt capacity.
For long pipe conveyor, steel cord conveyor structure can also be used at this time, in the upper and lower rope covered with a layer of landscape fabric. Like fabric conveyor

belt structure, as in the fabric and a layer of rubber between the ropes. For emergency repairs, you can temporarily use

Metal joints or replaced with an ordinary belt, until you can make long-term maintenance.
General conveyor belt does not have the required rigidity and flexibility, will produce permanent results with a core layer, fatigue, or other unpredictable problems. But the

advantage is that ordinary conveyor simple structure, low cost, low price, and sometimes can also be used as a substitute for the conveyor pipe. In the pass

When the belt conveyor, belt conveyor pipe conveyor belt and ordinary life are actually the same.powered roller conveyor
Pipe conveyor belt cleaning device and used in the same general belt conveyor, single and multi-blade scraper belt and rotating brush cleaner and air cleaner section can be

applied.
Pipe Conveyor Belt can be specially manufactured, so for conveying hot material. In particular, consideration must be selected belt size and the belt surface temperature of the

material, very hot conveyor belt surface will have a significant impact on the life.