Operation and maintenance and installation of belt conveyor

 
First, the start and stop the conveyor generally be started in an unloaded condition. By installing several units in the belt should be used when you can lock the starter to the

control room through a certain order to start and stop. In addition, in order to prevent unexpected accidents, each conveyor

Machine should be set in place to start or stop buttons can be individually stopped Renyiyitai. In order to prevent the conveyor belt for some reason is longitudinal tear, when Conveyor System

the conveyor is longer than 30m, the length along the conveyor, should be spaced a certain distance (e.g. 25-30m) to install a stop button.

Second, depending on the maintenance of belt conveyor belt in order to ensure reliable operation, the most important is to find and eliminate possible failures. Driver must

always observe this operation work of transport, such as abnormal should timely manner. Mechanical workers should be regularly inspected and

Check for any needs attention or components, it is very important. For example, a roller, does not seem very important, but a high-speed conveyor belt worn materials may soon

put its shell worn out, the emergence of a blade, the blade could seriously damage an expensive

Conveyor belt. Workers trained or experienced staff to detect impending accident and take preventive measures. Belt conveyor belt conveyor costs in the entire account for a

large proportion. In order to reduce the cost of replacement and repair belt, must attach importance topallet conveyor

Operation and maintenance personnel for the operation and maintenance of conveyor knowledge training. Table l-40 lists a number of operational problems occurred on conveyor

causes and treatment methods. Belt failure causes and elimination methods