Maintenance of belt conveyors

starting and stopping the conveyor should generally start in an unloaded condition. Should be used sequentially install several units belt conveyor can be blocked for the

starting device, control room in order to start and stop a certain order. In addition, in order to prevent unexpected accidents, each conveyor

Machine should be set in place to start or stop buttons can be individually stopped Renyiyitai. In order to prevent the conveyor belt for some reason is longitudinal tear, when

the conveyor is longer than 30m, the length along the conveyor, should be spaced a certain distance (e.g. 25-30m) to install a stop button

.

in order to ensure reliable operation of belt conveyors, the most important is to detect and eliminate possible failures. This operation must always observe the work of

transport, such as abnormal should timely manner. Mechanical workers should regularly check for any required inspections and note Turn conveyor

Or components intended situation, it is very important. For example, a roller, does not seem very important, but a high-speed conveyor belt worn materials may soon put its shell

worn out, the emergence of a blade, the blade could seriously damage an expensive belt. Trained

Trained workers or experienced staff to detect impending accident and take preventive measures. Conveyor belt conveyor belt conveyor costs account for a large proportion. In

order to reduce the cost of replacement and repair belt, must pay attention to the operating and maintenance
roller conveyor
Personnel in the operation and maintenance of conveyor knowledge training.