Vibrating conveyor Introduction

      Vibrating conveyor with motor as vibration source, the forward movement of the material to be tossed simultaneously, to achieve the purpose of transportation;

institutional forms is divided into open, closed, transport
Can be divided into trough or pipe conveyor transport, motor position can be up, down or side assembly; The model structure is simple to install, easy maintenance, low energy

consumption, no dust,
Low noise, widely used in metallurgy, coal, building materials, chemical, food and other industries in powder and granular material handling.
     Vibration exciter to make use of the trough, so that the tank material sliding along a certain direction or throw shift continuous conveyor machinery. Of flexible linkage,

electromagnetic and inertial three.Metal detector for food

         ① elastic connecting rod. The eccentric shaft, connecting rod, connecting rod ends chute springs and other components. Rotation of the eccentric shaft rod ends for

reciprocating movement, sparking trough for directional vibration
Action. Prompting tank material constantly moving forward. Generally use low frequency, large amplitude or frequency of moderate moderate amplitude.

       ② electromagnetic. The core, coil, armature and other components trough. Rectified current through the coil, the resulting periodic variation of the electromagnetic

suction, sparking generates vibration trough
Action. Generally high frequency, small amplitude.

           ③ inertial. By the eccentric block, spindle, trough, etc., eccentric rotating centrifugal force generated when the chute excite vibrations. Generally use medium

frequency and amplitude.

SZF-type thermal inertia vibrating conveyorHeat Exchanger
  1, uses
        SZF-type thermal inertia vibrating conveyor is a function of both long-distance transmission equipment air lock. It applies to transport all kinds of middle block to

positive and negative dispersion degree and level of granular materials
Transport (≤ 500 ℃) high temperature and high abrasion materials such as dry hot slag, cement clinker and so on. Ideal for cement shaft kiln, the material sealed discharge

machine to do.
SZF type Vibrating conveyor using two-excited vibration motor as vibration source, the use of self-synchronization principle, two vibrating motors reverse rotation, so that the

bottom of the gimbal produce conveyor
Reciprocating, vibrating reed and the guide through the main role of the leaf spring, driving upper trough vibration, so as to achieve the purpose of transportation of

materials. This machine is a universal transport machinery, in addition to using
In the cement industry, can also be used in metallurgy, mining, chemical, electric power and other industries, is an ideal new transportation equipment.
 
      2, Features
   (1) long distance transport, transmission capacity, low energy consumption, low noise, high temperature material is transported without thermal state adjustments.
    (2) simple structure, easy installation, wear, maintenance workload is small.
    (3) stable, reliable, start, stop fast and smooth.
   (4) can be multi-point access to materials, vibration isolation performance, top of your library library at the end can be used.
   (5) fully enclosed structure, so the level of material sealed discharge machine, lock the wind to good effect.
        Technical performance parameters:
    1 Throughput: 50t / h
   2 bay width: 400mm
   3 Conveying length :6-30m
   4 Power: conveying length is less than 10m when 1.5kw × 2
   Conveying length of 10m to 20m when 2.2kw × 2
   Conveying length of 20m to 30m when 3kw × 2
    5 Whole appearance (H × W): 1200 × 730mm
    6 Weight: weight per meter of conveyor approximately 350kg.
  TZC series vibrating conveyor
    Purpose:
      TZC series vibrating conveyor vibration using the enclosed trough the trough of the material from the inlet port to the discharge port fast delivery, can be used for

conveying powder or block, at room temperature
Or high temperatures of the various materials.
'
     TZC line conveyor chute section can be made open, closed, circular, rectangular, trapezoidal, and other types. Feed trough and discharge may also need to be made
That feed the material a little, a little feed, multi-point discharge, multi-feed, a little discharge and other types.
TZC series conveyor trough using a rubber spring support, relying on fixed trough two vibrating motors on both sides of the self-synchronous operation, the chute produce linear

vibration. The series lost
Sending machine resonance region work in the past, so the amplitude stability, easy installation and adjustment.
        Conveying length of not more than 10m in the case, the series vibrating conveyor has a simple structure, reliable operation, able to adapt to a variety of materials, no

dust pollution, maintenance side
Will, etc., have been widely used in metallurgy, mining, coal, building materials, chemical, food, glass and other industries.
        Material transport over a distance of 10m, can be used multiple TZC Series conveyors connecting conveyor.
        TZC series of conveyors can also be made on the trembler, the vibration motor disposed in the top of the trough, the vibration motor mounting easy to ensure accuracy,

disassembly is also more convenient.
 DZS series motor vibrating conveyor
        DZS series motor vibrating conveyor fixed to the tank on the use of two vibrating motors to do the same in the opposite direction from the synchronous rotation,

vibration motor carried by the rotating eccentric block
Instantaneous position of each of the centrifugal force generated by throwing contribute reciprocated in the direction along the entire conveyor trough exciting force along the

direction for a cyclical reciprocating, the material in the groove along the body
For parabolic linear direction, the material from falling into the tank into the discharge end, the rapid advance, so as to achieve the purpose of transportation of materials.

This machine can be used to transport massive, granular or
Powder at room temperature or elevated temperatures of the various materials. This series of vibrating conveyor has a simple structure, light weight, low noise, reliable

operation, no dust pollution, easy installation and maintenance
Advantages. Widely used in metallurgy, mining, coal, building materials, chemicals, food, glass, ceramics and other industries.
DZS series motor vibrating conveyor are open, closed two kinds, trough cross-section can be made round, rectangular and trapezoidal and other types. Feed trough and discharge

can also be
Made according to need a little feed, a little out of material, the feed point, multi-point discharge, multi-feed, a little out of material and many other types. Long distance

transportation available when multiple conveyors
Linking transport