Deceleration conveyor means

You can use squirrel cage induction motor: This type of small motors, portable conveyor mechanical variable speed drives can be like the Department of Space is not the speed, the drive

may be small, light weight form; if reconnected gear (gear), then the multiplier effect. No brushes or commutator, so almost no

Requiring maintenance basis.
Can only be set in both circuit design, the speed of the motor can be inserted into gear transport, transformation to become infinitely variable.
In order to improve performance: speed control range, is (soft start stop) to adjust the set time is really smooth and soft to change speed, you can ensure that the entire smug,

helpful product safety, ensure quality.
Often able to play a role:
Low-frequency and voltage gear domain ID slowly rising frequency and voltage value, the start of direct commercial power and a good starting efficiency, from small and large

starting torque resulting current. Small heat motor result is that there are more frequent starting, stopping and harmless
 Bay forward or reverse gear control transistor switches from the phase rotation. This way than the previous phase main circuit wires through the switch means movable parts and

is not part of the friction, heat will be more effective, so you can come back to the horizontal (lateral) as the forward reverse

Transportation frequently enables remote command will be able to change the frequency to do so. Therefore, it is easy to select the most suitable working speed to the right to

use.
Electrical braking deceleration, the motor will slow down the supply, the output frequency, motor speed will exceed the sync speed situation. When this state, the resistor is

not used, the motor still has 20% of the braking force of the degree of internal loss. Typically Turn conveyor constant torque load, it was quickly

Slow down, if not necessary, because there is no need to set any occasion most of the braking resistor. Braking frequency, particularly if the vector control using the low speed

mode, the speed control can be achieved with PG range 1:100 1:1000 'S as an alternative of the speed control operation.
Start and stop obedience: As speed, transmission speed, the material will be sent by the collapse of the conveyor, such as glass suddenly stops moving, then touching and glass

bottles, which may damage; but if the operation of the gear, as it is A low frequency start, so a small earthquake

Move, and the soft control.