Belt conveyors Handling Precautions
Before running the belt conveyors, belt conveyors first to confirm that the equipment, personnel, is transported goods are in safe intact state; Second, check all moving parts
of the normal no foreign body, check all electrical wiring is normal, normal to the belt conveyor put into operation. Final
To check the supply voltage and the device does not exceed the difference between the rated voltage ± 5%.
Put the belt conveyor running, you must do the following:
1 Close the main power switch, check the device power is being fed properly and the power indicator is lit. To normal after the next step.
2 Close the power switch on each loop, check whether it is normal. Under normal conditions of: device does not operate, belt conveyors running light is not on, inverter and
other equipment, power indicator light, the inverter display panel shows the normal (no fault code is displayed). food metal detector
3 in accordance with the process starts all electrical equipment in turn, starting on a normal electrical equipment (motors or other equipment has reached the normal speed, the
normal state) and then the next one electrical device startup.
4 the operation of the belt conveyor, conveying articles must be designed to comply with the requirements of items comply with design capacity of the belt conveyor. Secondly, we
must pay attention to all categories of personnel not touch the moving parts of the conveyor belt, non-professionals are not free to contact with electrical components, control
. Finally, in the belt conveyor can not run after the class of the inverter circuit, such as the identification of maintenance needs, you must stop the inverter in case of
operation, otherwise it may damage the drive. Pharmaceutical metal detector
5 conveyor belt running stop, press the stop button when the system only after a full stop off the power.