telescopic belt conveyor major structural description

telescopic belt conveyor main structure is to be introduced today the main content, but also one of its important points, then the next, it will expand the

specific narrative, so that we can more too good to learn this knowledge, the conveyor has a basic understanding

And Theory.
In general, DSJ/80/40/2 × 40 telescopic belt conveyor is fixed and non-fixed portion the two major components, the fixed part comprises the head drive apparatus with a storage

device, a tension device, reception put tape devices, rather than a fixed part of the frame, including fast disassembly and machine

Tail and other components. Below to briefly explain each part.Telescopic belt conveyor
(1) Head gear
By the drive roller, reducer, fluid couplings, racks, unloading side as well as head cleaning and other components, it is the entire conveyor drives.
The drive roller is a welded structure, the surface layer of the drum vulcanized rubber, with non-slip effect, and reduce the primary tension.
Three gear reducer is used, and by connecting the hood, with fluid coupling, the motor into one, and then fixed to the frame side plates. The first level, spiral bevel gear,

while the second and third grade, respectively helical and spur gear transmission.
Fluid coupling is used OXD-400 type hydraulic coupling from the pump wheel, turbine wheel, housing, auxiliary chamber housing and flexible coupling components.
Uninstall side composed mainly by unloading the drum, while the head of the hammer sweeper sweeper and plow sweeper two.
(2) Storage belt device
With bogies from storage, storage cassette, supporting and tensioning trolley cars and other components.
Bogies and reservoir storage cassette tape is welded structure, through bolt connection; supported by the following prop roll trolley, frame and wheels and other components, the industrial belt conveyor

role is to support the storage portion of the tape; tensioning car from the frame, wheels, pulleys and Idler pulleys and other components.
(3) tensioning means
By frame, pulley and tensioner cars, etc., on one side of the tension reel with clutch device.
(4) retractable tape apparatus
It is usually located in the rear tensioning car, from the rack, self-aligning roller, tape reels, reducer, motor and rotating rod and other components.
(5) the tail
By bearings, rails, rollers seat cushion care and cleaning roller and other components.
(6) integrated protection device
It has a variety of start-stop control and display, compact structure, reliable performance, and easy to install, which is the deviation of the sensor belt conveyor one of the

main protection device.