Assembly line describes the use and management of

The use of the assembly line in the factory is very broad, since the purpose of the assembly line a lot, so a wider coverage.

Factory assembly line is the most common way to cross-shaped arrangement of the belt line belt line cord can be adjusted to meet different body conveying speed production

requirements. Conveyor belts are made of anti-static, abrasion resistance, high temperature, oil, acid and other food-grade belt, according to different occasions for flexible

options.

Conveyor belt line using continuous or intermittent motion to transport all kinds of goods of different severity, can transport all kinds of bulk material, but also transport industrial conveyor

all kinds of cartons, bags and other single piece weight of small pieces of cargo, and versatile. According to the production operation can be selected: Normal continuous

operation, tempo runs, speed runs and other control methods; line body chosen according to local conditions: straight lines, curves, slopes and other forms.

Assembly lines, widely used in the meat processing industry, frozen food industry, fish processing industry, beverages and food, dairy processing industry, pharmaceutical,

packaging, electronics, electrical appliances, auto parts, processing and manufacturing, agricultural processing industry, and so a variety of industries .

Balance between the staff or try to balance between machines, so the output of the assembly line in order to achieve the required level. Assembly line balancing problems and
Airport conveyor
facilities planning phase involved. Assembly line balancing or not directly affect the productivity of manufacturing systems.

Assembly line balancing problem is a problem of facilities planning phase implicated. A workstation to complete the work assigned to the workstation with the total amount of the

basic unit of work is consistent with the total number. Assembly line balancing problem is that all the basic unit of work assigned to individual workstations, so that each

workstation on the beat (ie, the end of the assembly line products through two adjacent intervals) are at a busy state, the completion of the operation up to the amount, so that

each workstation non-working time (idle time) minimum.

Assembly line assembly line balancing is the design and management of a very important issue, because the balance of the assembly line or not directly affect the productivity of

manufacturing systems. In the past few decades, people assembly line balancing problem for a lot of research, has been a lot of theoretical results.