Heat-resistant conveyor belt use and maintenance methods
Use heat-resistant belt conveyor manufacturer
Mainly used in metallurgy, construction and other industries Belt conveyor sinter, coke, cement clinker and other high-temperature materials material temperature does not
exceed 800 ℃ with a surface temperature does not exceed 220 ℃ under the conditions of use. Features EPDM rubber cover layer is mainly based on heat-resistant belt
damaged even funeral
Loss of key performance transmission capacity and different heat levels. Skeleton material with heat-resistant canvas using domestic unique formula designed solved due EPR
saturation, poor adhesion, low adhesion between the layers of the key issues. With a light body with a long life of approximately 2-4 times
, Heat resistance and good.
Heat-resistant conveyor belt in the use and maintenance methods and conservation should be kept clean to avoid direct sunlight or rain and snow Baptist leaching, prevent
acids, alkalis, oils, organic solvents and other substances in contact one meter away from heating devices.
Save storage temperature should be maintained at 18-40 ℃ between relative humidity should be maintained at 50 - 80 between. Preservation period belt conveyor shall be
folded into a roll placed placement period should not be turned over once every quarter. Different type, size of the belt layers together not
Use its joints, preferably bonding method. Conveyor type, structure, size, number of layers should be based on reasonable selection criteria used conveyor speed usually not
more than 2.5 m s wear large blocks of material and the use of a large fixed unloading device should be adopted
Low speed. Conveyor belt drive pulley diameter cloth layer between the drive roller, supporting and bend pulley groove angle on the roller conveyor should be based on the
requirements of the design requirements reasonable selection. Feeding should be directed along the direction of the conveyor belt to reduce materials fall
When the impact should be adopted on the conveyor chute reducing materials falling distance conveyor feed section should be shortened by the idler roller spacing and use
of buffer zone for the missing material conform with soft moderate blocking plate to avoid file excellent plate scratch the surface of the conveyor belt.