Conveyors safety rules

A conveyor belt or pedestrians prohibited by people, belt slipping a hand to pull the belt is strictly prohibited, to avoid accidents;

Two, the industrial conveyor must be inspected prior to use part of the operation, the tape fastener and bearing device is normal, protective equipment is complete. Tape tensioner degrees

required before starting to adjust to the appropriate level.

Third, the industrial belt conveyor should load start. Other operating normally before feeding. Prohibits driving after the first feeding.

Fourth, run the tape deviation phenomenon occurs, you should stop adjustment shall not be reluctant to use, so as not to wear edges and increase the load.

Fifth, several conveyor running series, we should begin the discharge end, the sequence starts. All normal operation only after the feeding.

Six, working environment and sent the material temperature not higher than 50 ℃ and below -10 ℃. Shall not be transported with a pH of oils and organic solvents constituent

materials.

Seven, the conveyor motor must be well insulated. Mobile conveyor cables do not Luanla and dragging. Motor must be grounded reliably.

Eight, must be stopped before stopping feeding, unloading and other material on the belt to make deposits before parking.