2013年5月26日星期日

TD and D and NE series bucket elevator





 
TD-D-type bucket elevator Product Overview:
TD type by JB3926-85 "vertical bucket elevator" design and manufacturing standards, the current domestic common bucket elevators are vertical, newer. Bucket elevator for

vertical conveying powder, granular and small block and smaller abrasive bulk materials such as grain, coal, cement

, Crushed ore, lifting height up to 40m. TD-type bucket elevator hopper equipped with four kinds of Q-type (shallow bucket), H-type (arc bottom bucket), ZD type (in deep bucket)

SD type (deep bucket).chain conveyor

TD-D-type bucket elevator basic structure:
TD-type bucket elevator by the run portion (hopper with traction tape), the upper section with a drive pulley with tensioning roller lower section, the intermediate casing,

drives, check brakes and other components, For upward transport of bulk density ρ <1.5t/m3 powder, granular and small

Like non-abrasive and semi-abrasive bulk materials such as coal, sand, coke, cement, crushed ore.
TD-type bucket elevator structure: drive TD-type bucket elevator drives come in two forms, respectively, with a YZ-type reducer ZQ (or YY) type reducer. YZ-type shaft gear

mounted directly on the spindle shaft head, eliminating the transmission platform, couplings, so that the structure is compact, light weight

, And its interior has shaped roller backstop backstop reliable. The reducer, low noise, smooth operation, and with the spindle floating installation can eliminate stress.Telescopic belt conveyor



TD-D-type bucket elevator main features:
1 drive power is small, the use-feed into the induction discharge, large capacity hopper intensive layout. Increase in materials almost no feed back and dug material phenomenon,

so less power is invalid.
(2) to enhance a wide range of these types of materials hoist, less demand, not only can enhance the general powdery, granular materials, but also enhance the larger abrasive

materials. Tightness, less environmental pollution.
3 Run the reliability, advanced design principles and processing methods to ensure the reliability of machine operation, no down time more than 20,000 hours. Lifting height is

high. Hoist running smoothly, so you can upgrade to a higher level.
4 long life, take inflow feeding hoist type, without using bucket excavating, squeezed between the materials and collision phenomenon rarely occurs. The machine was designed to

ensure that the feed material, unloading few scattered, reducing mechanical wear.

没有评论:

发表评论