2013年5月29日星期三

Bent pipe belt conveyor design points


    Better than the common pipe belt conveyor belt conveyor can be notable feature is a small turning radius, thereby reducing the contour can not be used in geographically

universal belt or require multiple transfer points in the case optional pipe belt conveyor. Since the output pipe band

Send conveyor belt idlers around completely bound, so when compared with the general conveyor deviation phenomenon does not occur. Pipe belt conveyor in the horizontal and

vertical surfaces can be bent, can also bend on both sides, the abolition of transfer points, from the side, above or below through

Existing plant equipment and other obstacles, the conveyor belt has just passed the transition period began after the formation of tube bending, bending must be reached before heavy duty conveyor

the completion of the discharge roller transition section. The transition conveyor ends must be linear.
    Pipe diameter, usually bending radius, bending conveyor type and use of the decision. Is recommended to use the standard minimum radius of curvature in the horizontal or

recesses, the fabric band of the core tube 300 times the diameter, steel cord belt should be 700 times the diameter of the tube; but if the "S" shape,

Convex curved and the concave curved or horizontal integrated occurs, the minimum radius of the core fabric band is 400 times the diameter of the pipe, steel cord belt should be

800 times the diameter of the tube; convex curved in the horizontal bending and at the same time the presence of the minimum radius of the core fabric tube with a diameter of Telescoping conveyors

500 times, steel cord belt

Should be 900 times the diameter of the pipe. Foregoing is only general. Typically, the radius of the final decision, depending on the particular conveyor engineers static,

dynamic tension bending conditions and the types used in the General considerations.

没有评论:

发表评论