Remember points conveyor operation

Belt conveyor in the actual production process, the operator must do the following tasks:
    1 , the operator must be trained by professionals or operate conveyor. The operator must curve conveyor strictly comply with the relevant safety and shift system .
    2 , open the belt checked before transmission parts and wheels , chain plates and safety protection devices shall be solid and reliable.
    3 , check all parts of the lubrication , the lubrication components shall meet the requirements ,vertical conveyor lubrication equipment shall not reached "Five Sets" for filling oil .
    4 , the boot sequence
     ( A ) first opened by the material or equipment.
     ( 2 ) start the conveyor .
     ( 3 ) start feeding device or equipment.
    5, the belt conveyor in operation to feed evenly. Material too easy to plug the outflow outside the machine , resulting in chain plate derailment .
    6 , should always check the tightness of the chain plate , if necessary, can be readily adjusted . Allowed to have uneven force deflection phenomenon.
    7 , conveyor during operation, any failure occurs , immediately stop inspection repair.
    8, the first stop should stop feeding device or devices to be more material on the conveyor net to go , and then stop.
    9 , to keep conveyors clean and hygienic.