Conveyor Introduction

Belt is the most widely used continuous conveyor , belt conveyor is common , it is a closed endless 90 degree conveyor belt carrying member of the traction member and the continuous

conveyor . Belt conveyor with horizontal arrangement , tilting with convex arc type, with concave arc type

And with a concave arc curve type form . Belt conveyor with fixed and mobile two. The former is fixed to the conveyor at a predetermined position on the belt , mainly for the

horizontal direction or the tilt direction of the slope is not continuous transportation of materials, the quality of light can be transported in large

Were pieces of cargo . Mobile conveyor with automated sorting machine walking devices , changes in working position can be moved . Conveyor according to its structure can be divided into ordinary belt ,

new belt .

There are an endless conveyor belt , drive means , tensioning device, various rollers , racks , etc., in which both belt carrying member carrying the goods , there is a transfer

of traction traction member . Belt around the drive rollers and tensioning rollers , idlers and supported in many

On . Work, by the motor through reduction gear , the drive roller to rotate. Relying on friction between the belt and the roller , smooth to drive, the goods transported to the

loading area.

Conveyor layout general requirements: the curve segment , the ban set to , unloading equipment , all kinds of give , unloading device should be placed in the horizontal section

. General layout of the belt tensioning device tension minima . Conveyor arranged in a straight line as much as possible , you should avoid simply furnished security according

to National Cheng Kung University concave terrain

Arc , arc furrow forms .
In the arrangement should note the following :
A segment of the curve , not set up feeding and discharging devices.
B to discharge materials and intermediate segment is preferably provided on the horizontal , but can also be located on the inclined section . When located in the inclined

section , when the discharge point is preferably provided midway in the horizontal section , but can also be placed on the inclined section . Located in the inclined section ,

the midway point of discharge should not exceed 10 ° -20 inclination

°, otherwise easy to swap material .
C If the horizontal segment uniform feeding , and in the turning point of relatively smooth , convex radius of curvature of the appropriate section .
D When the conveyor is needed by the turning angle of the horizontal segment segment , it is best to use several convex arc groove roller carried over , in order to prevent the

material scattered .
E When the conveyor is inclined to horizontal transition section, the radius of curvature of the concave arc should generally be no load on the belt tension and is formed with a

radius of curvature of its own weight , so as not to make the float ribbon in the over- section .