Belt conveyor operation and maintenance Third

Maintenance of belt conveyors
1 day, check that the drive motor and reducer is abnormal;
2, check the belt is loose every day, and timely adjustments;
3 monthly checks whether the elongated conveyor belt, and timely adjustments;
4, the monthly check drum rotation is flexible, and timely repair;
5, the monthly check drive sprocket and chain of goodness of fit, adjust, and add the oil to the chain;
6 month control box with an air gun blow off Flexible skatewheel conveyor the dust, to prevent failure;
7, reducer after the first 100 hours of use to replace the cleaning internal gear oil, put new oil after every 2500 hours and then replaced once;
8, major maintenance once a year to check the extent of damage accessories.

2 gear off the chain: one, the chain is Extendable conveyor too long 2, the gear off the chain off, screw loose.
1, the chain chopped reassembly good deployment. 2, re key Shang Hao, matter eliminated.

2 belt slip: 1, belt adjustment is not good, too loose two belt is too long
A good tune belt tightness 2, increasing compaction roller deployment

2 belt ran: 1, poor deployment of drum 2, the re-commissioning roll angle

2 Transmission with sound: one, the chain does not teeth; 2 bearings in oil
1, chain wheel straightening 2, bearing oil