To belt conveyor abnormal noise causes and treatment

 Run of the belt conveyor drive unit, the drive roller and bend pulley, and idlers in normal emits unusual noises, can determine the device under abnormal noise Malfunction.industrial conveyor

Runtime of a roller eccentric serious noise when the belt conveyor idlers often abnormal noise occurs, accompanied by periodic vibration. In particular, the return roller, because of its greater length

Self-important, the noise is relatively large. The noise occurred mainly due to two reasons. First, manufacturing roller seamless steel pipe wall thickness is uneven, the centrifugal force generated. Two

Processing both ends of the bearing center of the hole and the outer circle center deviation is large, so that the centrifugal force is too large. Can continue to use in the case of bearing damage and to allow the presence of noise.

2 two-axis misalignment noise coupling between the high-speed end of the drive unit motor and reducer coupling with brake wheel coupling issued by the unusual noise, such

The noise associated with the motor rotational vibration of the same frequency. When this noise should be timely adjust the position of the motor reducer to avoid the input shaft fracture.check weigher

Idler pulleys bend pulley and drive rollers work properly with the drive roller abnormal noise when the noise is small, abnormal noise bearing damage at the housing hair

A gurgling sound, this time to replace the bearings.